Diversified Technology cPB-4321 PICMG 2.16-compliant, Pentium III, Dual LAN
cPB-4321
cPB-4321/1000-A
cPB-4321/1000-B
cPB-4321/1000-C
Related Products
cPS-4081
cPS-8161
cPS-5088
Vox Shield Extended Warranty Program
Product warranties and services are handled through our industrial partner, VoxShield. Our partnership with VoxShield allows for seamless, timely turnaround times without you, our valued customer, having to make any additional phone calls or work with anyone but your CPUBoards.com representative. VoxShield offers a completely customizable warranty and service program to fit any budget, timeline, or project. For more information, ask your sales representative or click here.
Repairs
CPUBoards.com is equipped to repair or replace industrial electronic equipment spanning all areas of the industry. While we diagnose and prepare your product for repair, we will simultaneously attempt to locate a replacement, finding the quickest, most efficient solution to getting you back up and running in the least amount of time possible. If you need something repaired, contact us or click here to learn more.
Return Policy
This item is covered by CPUBoards.com's Standard Return Policy.
- Return for a refund within: 30 Days*
- Return for replacement within: 30 Days
- *Restocking Fee Applies
Introduction
cPB-4321 is orderable as:cPB-4321/1000-A, cPB-4321/1000-B, cPB-4321/1000-C
Diversified Technology's modular cPB-4321 hot-swap CompactPCITM processor blade, compliant with the PICMG 2.16 packet switched backplane (PSB) open standard, offers superb value with a feature set optimized for Internet, telecom and industrial control applications.The cPB-4321 comes with a low power, 1GHz Intel Pentium III processor with 256KB L2 cache, 440GX chipset with 100MHz front side bus, and either 512MB or 1GB ECC SDRAM. Onboard are two 10/100Mbits/sec Ethernet auto-negotiating controllers, Ultra DMA/33 IDE hard drive, 32-bit/33MHz PMC site, PS/2 keyboard and mouse interfaces, Universal Serial Bus (USB) and serial ports, floppy interface and a SVGA CRT controller. An optional CD-ROM drive mezzanine card facilitates software installation; an optional IDE-compatible CompactFlash carrier card is available.
As a System Master processor blade in a CompactPCI multiprocessing system, the cPB-4321 interfaces to the backplane through a transparent PCI-to-PCI bridge allowing it to communicate directly with all peripheral CPU boards in the system via the CompactPCI bus. Optionally, it may operate in a peripheral slot, where it receives power but does not communicate on the CompactPCI bus.
read more
Quick Specs
| Bus Interface | CompactPCI |
| CPU Family / Class | Intel Pentium III |
| System Chipset | Intel 440GX |
| view all specs | |
Product Features
•
Intel® 1GHz Pentium® III Processor-M, 256KB L2 Cache
•
Intel® 440GX Chipset with 100MHz FSB
•
512MB or 1GB ECC SDRAM
•
PCI Video with 2MB SDRAM
•
Two Fast Ethernet Interfaces & PMC Site
•
Onboard 2.5" Ultra DMA/33 EIDE Drive, Optional CompactFlash Support
•
6U x 4HP, Operates as System or Peripheral Processor
Full Product Specifications
Download Datasheet| BIOS | Pheonix core, Console redirection, PXE 2.0 option ROM |
| Bus Interface | 100MHz Front Side Bus; 64-bit/33 MHz CompactPCI Bus interface, 5V V(I/O) CompactPCI signaling as host, 3.3V or 5V V(I/O) as peripheral processor, Supports onboard 32-bit/33MHz 3.3V PMC card |
| Cache | 32KB internal L1 cache; 256KB 64-bit on-die L2 Cache |
| Chipset | Intel 440GX |
| Clock / Calendar | Real-time clock with 256 byte battery backup CMOS RAM |
| Cpu | Intel Low Power (BGA2) Pentium III at 1GHz |
| Data Path | 64-bit/100MHz on CPU and memory bus, 64-bit/33MHz on off-board CompactPCI bus; 32-bit/33MHz on onboard PCI bus, Intel 21154 PCI-to-PCI bridge, |
| Flash Memory | 4MB Flash: 1MB for BIOS, 3MB for user, 512KB EPROM BIOS recovery module, |
| hardware reset on 2nd stage | IPMI-based (1.0 compliant) 2.9-compliant Baseboard Management Controller (BMC) |
| Interoperability | Validated to operate in a PICMG 2.16-compliant system platform such as DTI's cPS-4081, DTI's cCM-3401 star topology Chassis Management Module, DTI's cSB-4240 24-port level 2/3 Ethernet Switch Blade, 3rd party PSB products |
| Memory | Configured with either 512MB or 1GB 72-bit registered PC100 3.3V ECC SDRAM |
| OS Compatibility | General: PC-compatible, Enhanced: Windows®2000; Linux; VxWorks |
| Peripherals & I/O Interface | Optional 20GB 2.5" EIDE drive mounted on board, or CompactFlash, Type II drive carrier, 32-bit/33MHz IEEE P1386.1 PMC socket Front panel & rear port push button reset, Two IDE, System Health and Hot Swap LEDs on front panel |
| Supervisory | Two-stage programmable watchdog timer drives NMI or "INIT" on 1st stage, |
