Find out more about our Partner Program Can't find a part? Bet we can! Contact us: 1-800-941-0322

Zippy Technology R3G-5B40V4V,N + 1 Redundant Form,1140W, Input Type Power Factor Correction (PFC), (DxWxH) 276/10.87 (mm/inch) x 83/3.27 (mm/inch) x 127/5 (mm/inch), Module GIN-3600V, Power Management Bus (PMBUS), High Effenciency Series, Silver 80 Plus power supply

Quick Specs

Casing (Enclosure) Fully Enclosed
Form Factor N1 Redundant
Input Type AC
Manufacturer ZIPPY TECHNOLOGY
Number of Outputs 3
Output Power Max 1140 W
Output Type DC
view all specs

Product Features

  • Efficiency: 82% typical at 115vac, full load
  • Power good signal: on delay 100ms to 500ms
  • Over power protection: 110% ~ 160%
  • Remote on/off control
  • Hold up time: 16ms minimum at full load & nominal input voltage
  • N+1 redundancy function hot-swappable function
  • +3.3v remote sensing
  • Temperature range: operating 0C~40C
  • The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5v standby). As logic level is low, outputs voltage were enable, as logic level i
  • Protection: shut down and latch off
  • Over voltage protection: +5v-5.9v~6.7v, +12v-13.0v~15.0v, +3.3v-3.9v~4.3v short circuit
  • Current/balance load sharing design
  • Dielectric withstand: input/output 1500 vac for 60 second input to frame ground 1500 vac for 60 second
  • Emi noise filter: fcc class b, cispr22 class b
  • Isolation: built-in in power module
  • Safety: to meet ul, cul, tuv

Full Product Specifications

Casing (Enclosure) Fully Enclosed
Form Factor N1 Redundant
Input Type AC
Manufacturer ZIPPY TECHNOLOGY
Number of Outputs 3
Output Power Max 1140 W
Output Type DC