Zippy Technology AP1A-6150F,DC 1U Form,150W, Input Type DC +12V, (DxWxH) 190/7.48 (mm/inch) x 100/3.94 (mm/inch) x 39/1.54 (mm/inch)

Quick Specs

Casing (Enclosure)	Fully Enclosed
Form Factor	1U
Input Type	DC
Manufacturer	ZIPPY TECHNOLOGY
Number of Outputs	1
Output Power Max	150 W
Output Type	DC

view all specs

Product Features

• The unit shall accept a logic open collector level which will
• Remarks: 85% is normal condition and 95% is with special coating process
• Overload protection: 110~150%
• Disable/enable all the output voltage (exclude +5v stand by).
• Cooling: 38mm dc fans
• Power good signal: on delay 100ms to 500ms,off delay 1ms
• Hold up time: 1.6ms minimum at full load & nominal input voltage
• Humidity :operating:20%-95%, non-operating:10%-95%
• Short circuit protection: +5v +12v +3.3v
• Input to frame ground 1500 vac for 1 second
• As logic level is low, outputs voltage were enable,
• Safety : ul 60950, csa 22.2 no 950, tuv en-60950
• Efficiency: min 70% at dc 12 input
• Over voltage protection: +5v-5.5v~7.0v , +3.3v-4.0v~4.5v
• Temperature range: operating 0C~40C
• Dielectric withstand: input/output 1500 vac for 1 second
• Emi noise filter: fcc class a, cispr22 class a
• Remote on/off control
• As logic level is high, outputs voltage were disable.