Entry-level VIPER-M64-F32-V2-R6 VIPER PC/104 format 400MHz PXA255 XScale embedded controller

Quick Specs

Board Form	PC/104 (3.8 × 3.6 in / 96.5 × 91.4 mm)
Bus Interface	PC/104
Manufacturer	ARCOM

view all specs

Product Features

• 1Mbyte BootROM
• 3V Lithium battery for backup of RTC and SRAM
• Trusted Platform Module (TPM) & tamperdetect input opt. - factory fit only
• JTAG port for test and debugging
• Drive support-CompactFlash (hot swap Type II socket for memory and I/O cards), Onboard resident Flash drive (with JFFS2 support for Linux, Transaction
• Integrated peripherals-audio controller with AC97 codec (LM4548) & 250mW stereo amplifier, battery backed real time clock, I2C controller, 48 channel programmable interrupt controller, 16 channel DMA
• Five high performance UART channels-16550 up to 230.4Kbits/sec : full modem control lines via RS232(this channel can be factory fitted for TTL signals), 16550 up to 921.6Kbits/sec : Tx, Rx, CTS and RT
• 8 buffered digital inputs / 8 buffered digital outputs (+5V tolerant)
• Up to 32Mbytes Intel StrataFlash (P30)
• 10/100baseTx Ethernet controller - SMSC 91C111
• Industry standard PC/104 format 3.8" x 3.6" (96mm x 91mm)
• Integrated peripherals
• PXA255 XScale 400MHz processor
• FT/STN flat panel graphics controller (up to 640 x 480 x 16-bit color)
• Dual USB host controller v1.1 - Philips ISP1160
• RoHS compliant
• 256Kbytes battery backed SRAM (using onboard battery)
• PXA255 XScale 400MHz processor (ARM* architecture v.5TE compliant), 32K data cache / 32K instruction cache, Low power RISC technology
• Up to 64Mbytes SDRAM
• Dual USB host controller v1.1 - Philips ISP1160-can also be configured for 1 USB host & 1 USB client port (PXA255)
• Five high performance UART channels
• TFT/STN flat panel graphics controller (up to 640 x 480 x 16-bit color)
• Drive support
• Trusted Platform Module (TPM) & tamper detect input opt. - factory fit only
• Operating current: 340mA @ 5V (typical), 50mA @ 5V (deep sleep)